Zeck WB1500 / 2.5 Puller Tensioner |
|
PULLER-TENSIONERWB 1500/2.5Full electronically controlled puller-tensioner for 1 rope/conductor (optional 2) with 2 bull wheels (Ø 1500 mm) and groove diameter 45 mm. Max. pulling/tensioning force of 25 kN and ZECK stringing data record system. |
|
WB 1500/2.5 – ZECK GmbH
PULLER PERFORMANCE
Max. pulling force: |
25 kN |
Max. speed: |
6 km/h |
Speed at max. pulling force: |
1.2 km/h |
TENSIONER PERFORMANCE
Max. tensioning force: |
25 kN |
Speed at max. tensioning force: |
6 km/h |
Min. tensioning force: |
approx. 2 kN |
BULL WHEELS
Number of bull wheels: |
2 |
Diameter of bull wheels: |
1500 mm |
Groove diameter: |
45 mm |
Number of ropes/conductors: |
1 (optional 2) |
DIMENSIONS/WEIGHT
Length x width x height: |
4950 x 1850 x 2700 mm |
Weight: |
2200 kg |
ENGINE
-
Max. 26 kW (35 hp)
-
Liquid-cooled diesel engine with automatic rpm control
-
12 V system with high capacity battery
DRIVE SYSTEM
-
Each bull wheel with a completely enclosed individual drive unit (motor + brake + gear box) for minimal maintenance and high efficiency
-
Automatically controlled oil cooling system
-
Hydraulic system to control 1 drum stand
-
Each bull wheel with an automatically activated safety brake system
CONTROL SYSTEM
-
Control of conductor in/out via joystick
-
PLC controlled machine for optimized productivity and safety
-
WQVGA Color display for monitoring the pulling/tensioning force, hydraulic-, engine- and electrical system with intelligent diagnostic and troubleshooting system
-
ZECK stringing data record system with USB interface
-
Automatic Tensioning System (ATS)
-
Overload protection system
GENERAL FEATURES
-
1 rigid axle chassis for up to 30 km/h
-
Lockable aluminum cover
-
Back support via robust mechanical supporting plates
-
Front support via robust mechanical supporting winch
-
Automatic rope/conductor clamping system with grounding device
OPTIONAL FEATURES
-
Version for up to 2 conductors
-
Brake-/lighting system and mudguards (for rigid axle chassis)
-
1 spring-mounted axle chassis with brake-/lighting system and mudguard for up to 80 km/h (car application)
-
Back support via hydraulic sprag
-
Cable or radio remote control
-
Electronic printer for ZECK stringing data record system
-
Hydraulic system (700/1000 bar) to power compression tools
-
Biodegradable hydraulic oil
-
Pre-cleaner for engine air filter
-
Arctic kit – with preheating system for up to -30 °C
-
Noise reduction kit
-
Large, lockable tool box
-
Machine version for left and right laid conductor
Special modifications or equipment on request.