ComeUp Walrus 18.0 12v / 24v

  • 12V/24V DC severe duty winch rated at 18.000 lb pulling meets or exceeds your expectations.
  • Waterproof and dustproof construction:
    - Potted contactor and motor provide complete protection from water penetration and allow dependable operation in up to 1.8 meter of water. 
    - Rubber seals at motor and gear housing joints for independent water protection 
    - Double lip and spring seal at drum support racks 
    - Industrial duty remote control with twist-on connector to provide total protection from water.
  • Water-proof remote control with thermometric LED indicator alerts when receiving a warning signal from the motor over-heated.
  • Tough aluminum die cast housings withstand strength of 2 times winch line pull at least.
  • U.S. Germany, U.K. France, etc patented mechanical cone brake holds the full load without slippage.
  • Corrosion resistance 720hr.
  • Meet international standards of CE Machinery Directive 2006/42/CE, CE Electromagnetic Compatibility Directive 2004/108/EC, and SAE J706 Surface Vehicle standard 2003-08 rev.
 
Specification/Part Numbers
  • Part number:  PN 281800 (12V) / PN 281810 (24V)
  • Rated line pull: 8,165 kg / 18,000 lb single line
  • Line speed ( 1st layer): 5.2mpm / 17fpm 45 A at 12V, 7.0 mpm / 23 fpm 35 A at 24V no load
                                            0.8mpm / 2.6fpm 320 A at 12V, 1.7 mpm / 5.6 fpm 210 A at 24V full load
  • Motor: 5,220 w / 7.0 hp 12V series wound
                4,474 w / 6.0 hp 24V series wound
  • Gear train: 3-stage planetary 343:1
  • Clutch (freespooling): Rotating ring gear
  • Brake (outside the drum): Automatic, full load CBS (Cone Brake Structure)
  • Winch construction: Aluminum die cast housings with steel drum
  • Drum size: 89 mm x 204L mm (3.5" x 8"L)
  • Control: Waterproof remote with thermometric indicator LED w/ 5 m (17') cord
  • Rope type: 6 × 29 - IWRC (Breaking strength 100.7 kN)
  • Rope size: 11.1 mm x 27 m (7/16” x 89’)
  • Mounting bolt pattern: 254 mm x 114.3 mm (10” x 4.5”)
                                                254 mm x 165 mm (10" x 6.5")
  • Mounting: Foot forward mounting only 
  • Winch weight (including rope) : 72 kg / 158.7 lb
  • Gross weight : 78 kg / 172 lb
  • Box dimension, (L x D x H) : 690 x 270 x 405 mm (27.2" x 10.6" x 15.9")

Line Speed and Amp. Draw (1st layer of wire rope on the drum): 

Line Pull, 
kg / lb
 Line Speed,mpm / fpm   Amp. Draw,  A 
12V  24V 12V 24V
No load
 5.2 / 17.1  7.0 / 23  45
35
2,268 / 5,000
 2.5 / 8.2  3.5 / 11.5  110
90
4,536 / 10,000
 1.6 / 5.2  2.6 / 8.5  190
120
6,804 / 15,000
1.2 / 3.9   2.2 / 7.2  240
170
8,165 / 18,000
 0.8 / 2.6  1.7 / 5.6  320
210

Line Pull and Rope Capacity:

Layer of Rope
Pull by layer, kg / lb
Total Rope on the Drum, m / ft
1st
8,165 / 18,000
5.6 / 18.3
2nd
6,683 / 14,733
12.4 / 40.6
3rd
5,656 / 12,469
20.4 / 67
4th
4,903 / 10,809
27 / 89

Warning  

•The winch is not intended to be used in any manner for the movement or lifting of personnel. 
• The rated line pull shown is based on the first layer of rope on the drum.
• The rope winding on the drum shall remain 5 wraps from the drum.

Warranty
Each new winch is guaranteed against defects in workmanship and material defects for a stipulate period from date of purchase.
*Automotive Winch: Limited lifetime warranty for mechanical components, 
                               One (1) year warranty for electrical components,
WIRE ROPES ARE NOT INCLUDED UNDER WARRANTY.
Dimension, mm/in:

Walrus 18.0

Accessory:

Standard Accessories
  • Roller fairlead
  • Remote control w/5 m (17’) cord
  • Detachable control box 
  • Wire rope w/clevis hook 
  • Cable tensioner
  • 1.8 m (6’) 2 gauge battery lead   
  • Handsaver strap