Zeck WB1500/16+4+4+4 Puller Tensioner |
|
PULLER-TENSIONERWB 1500/16+4+4+4Full electronically controlled puller-tensioner for up to 4 ropes/conductors with 8 bull wheels (Ø 1500 mm), groove diameter 45 mm and individual control of each bull wheel set. Max. pulling/tensioning force of 4 x 48 kN or 1 x 170 kN and ZECK stringing data record system. |
|
WB 1500/16+4+4+4 – ZECK GmbH
PULLER PERFORMANCE
Max. pulling force: |
4 x 48 kN or 1 x 170 kN |
Max. speed: |
4.8 km/h |
Speed at max. pulling force: |
2.3 km/h |
TENSIONER PERFORMANCE
Max. tensioning force: |
4 x 48 kN or 1 x 170 kN |
Speed at max. tensioning force: |
4.8 km/h |
Min. tensioning force: |
approx. 3.5 kN (48 kN)variable |
approx. 13 kN (170 kN) |
BULL WHEELS
Number of bull wheels: |
8 (4 x 2) |
Diameter of bull wheels: |
1500 mm |
Groove diameter: |
45 mm |
Number of ropes/conductors: |
up to 4 (1 + 1 + 1 + 1) |
DIMENSIONS/WEIGHT
Length x width x height: |
8500 x 2550 x 3800 mm |
Weight: |
17500 kg |
ENGINE
-
Max. 200 kW (272 hp)
-
Liquid-cooled diesel engine with automatic rpm control
-
24 V system with high capacity battery
DRIVE SYSTEM
-
Each bull wheel with a completely enclosed individual drive unit (motor + brake + gear box) for minimal maintenance and high efficiency
-
Automatically controlled oil cooling system
-
Hydraulic systems to control 4 drum stands individually
CONTROL SYSTEM
-
Control of conductor in/out via joystick
-
PLC controlled machine for optimized productivity and safety
-
WVGA Color display for monitoring the pulling/tensioning force, hydraulic-, engine- and electrical systems with intelligent diagnostic and troubleshooting system
-
ZECK stringing data record system with USB interface
-
Automatic Tensioning System (ATS)
-
Overload protection system
GENERAL FEATURES
-
2 rigid axle chassis with parking brake for up to 30 km/h
-
Lockable aluminum cover
-
Back support via hydraulic sprag
-
Front support via hydraulic cylinder
-
Automatic rope/conductor clamping system with grounding device
OPTIONAL FEATURES
-
Self-propelled chassis controlled by radio remote
-
Brake-/lighting system and mudguards (for rigid axle chassis)
-
2 spring-mounted axle chassis with brake-/lighting system and mudguard for up to 80 km/h
-
Electronic printer for ZECK stringing data record system
-
Cable or radio remote control
-
Synchronization-System
-
Remote diagnosis with GPS modem
-
Hydraulic system (700/1000 bar) to power compression tools
-
Biodegradable hydraulic oil
-
Pre-cleaner for engine air filter
-
Arctic kit – with preheating system for up to -30 °C
-
Noise reduction kit
-
Machine version for left and right laid conductor
Special modifications or equipment on request.