Zeck B1500 / 6 x 3

TENSIONER

B 1500/6x3

Full electronically controlled tensioner for up to 3 conductors with 6 bull wheels (Ø 1500 mm), groove diameter of 45 mm and individual control of each bull wheel set. Max. pulling/tensioning force of 3 x 60 kN and ZECK stringing data record system.
 

B 1500/6x3 – ZECK GmbH

TENSIONER PERFORMANCE

Max. tensioning force:

3 x 60 kN

Min. tensioning force:

approx. 8 kN

Max. speed:

5 km/h

PULL-BACK PERFORMANCE

Max. pulling force:

3 x 60 kN

Speed at max. pulling force:

1 km/h

BULL WHEELS

Number of bull wheels:

6 (3 x 2)

Diameter of bull wheels:

1500 mm

Groove diameter:

45 mm

Number of conductors:

up to 3 (1 + 1 + 1)

DIMENSIONS/WEIGHT

Length x width x height:

5900 x 2300 x 2800 mm

Weight:

8600 kg

ENGINE

  • Max. 96.5 kW (131 hp)

  • Liquid-cooled diesel engine with automatic rpm control

  • 24 V system with high capacity battery

DRIVE SYSTEM

  • Each bull wheel with a completely enclosed individual drive unit (motor + brake + gear box) for minimal maintenance and high efficiency

  • Automatically controlled oil cooling system

  • Hydraulic systems to control 3 drum stands individually

CONTROL SYSTEM

  • Control of conductor in/out via joystick

  • PLC controlled machine for optimized productivity and safety

  • WVGA Color display for monitoring the pulling/tensioning force, hydraulic-, engine- and electrical systems with intelligent diagnostic and troubleshooting system

  • ZECK stringing data record system with USB interface

  • Automatic Tensioning System (ATS)

  • Overload protection system

GENERAL FEATURES

  • 2 rigid axle chassis with parking brake for up to 30 km/h

  • Lockable aluminum cover

  • Back support via hydraulic sprag

  • Front support via robust mechanical supporting winch

  • Automatic conductor clamping system with grounding device

OPTIONAL FEATURES

  • Brake-/lighting system and mudguards (for rigid axle chassis)

  • 2 spring-mounted axle chassis with brake-/lighting system and mudguard for up to 80 km/h

  • Front support via hydraulic cylinder

  • Cable or radio remote control for tensioning mode

  • Electronic printer for ZECK stringing data record system

  • Synchronization-System

  • Remote diagnosis with GPS modem

  • Hydraulic system (700/1000 bar) to power compression tools

  • Biodegradable hydraulic oil

  • Pre-cleaner for engine air filter

  • Arctic kit – with preheating system for up to -30 °C

  • Noise reduction kit

  • Machine version for left and right laid conductor

Special modifications or equipment on request.