Mountable Drum Winch |
|
ST 140 Z251 / ST 180 Z251 / ST 280 Z251 – ZECK GmbH MOUNTABLE DRUM WINCHST 140 Z251 / ST 180 Z251 / ST 280 Z251Flexible drum winch for mounting on a tractor or similar vehicles. Suitable for lifting loads for fast and safe tower equipping, erection or final sagging.
|
|
ST 140 Z251 / ST 180 Z251 / ST 280 Z251 – ZECK GmbH
PULLER PERFORMANCE
(Depending on the hydraulic system of the driving vehicle – data e.g. for 55 l/min. and 230 bar.)
Max. pulling force (inner rope layer): |
|
ST 140 Z251 |
15.7 kN |
ST 180 Z251 |
22 kN |
ST 280 Z251 |
34 kN |
Max. speed (outer rope layer): |
|
ST 140 Z251 |
70 m/min |
ST 180 Z251 |
50 m/min |
ST 280 Z251 |
40 m/min |
DRUM CAPACITY
K = 55000 => e.g. Ø 12mm |
380 m |
DIMENSIONS/WEIGHT
Length x width x height: |
800 x 1050 x 630 mm |
Weight: |
300 kg (without rope) |
DRIVE SYSTEM
-
Drum with completely enclosed drive unit (motor + brake + gear box) for minimal maintenance and high efficiency
-
Continuously variable rope speed and accurate control at max. load
-
Automatically activated drum safety brake system
CONTROL SYSTEM
-
Control of rope in/out via hand lever
GENERAL FEATURES
-
Automatic rope guiding device
-
Large rope drum with stable pressure rollers for fixing the rope
OPTIONAL FEATURES
-
Radio remote control
-
Free wheel device to pull out ropes by hand (without engine)
-
Slack rope safety system => prevents rope from getting loose and crossed over (only for steel ropes)
-
Complete with tractor (New Holland or other model on request)
-
Crane mounted on tractor (e.g. Palfinger PK 6001)
-
Front support via robust mechanical sprag
-
Additional single capstan winch
-
Ropes in various versions (steel or synthetic fibres)
Special modifications or equipment on request.