Comeup Hydraulic Hoisting Winch APE 16

1,600 kg Hydraulic Hoisting Winch

  • Internally lubricated for reliable power and an exceptionally long service life.
  • Compact, hardened and high efficiency gear trains reduce power loss and placed inside the drum.
  • Multi-Disc Brake (MDB) patented and two ways counter-balance valve together for holding full load.
  • The normal lifting capacity is rated at the top layer of wire rope. It always lifts its rated load no matter what layer of wire rope it is.
  • The drum is dimensioned to obtain a minimum D/d ratio of 18:1 with a 5:1 minimum safety factor at the rated load.
  • “The winch meets the requirement of FEM9.511 covering rating and classification and FEM 1001 standard for the calculation of lifting equipment.
  • Compliance with international standards such as ASME B30.7 and, CE Machinery Directive 2006/42/EC
 
Specification/Part Numbers
  • Part number: PN 681920
  • Rated line lift: 1,600 kg ( 3,527 lb ) single line at the top layer of rope
  • Line speed: 43 mpm / 141 fpm single line at the top layer of rope
  • Motor: 159 cm3/rev ( 9.7 in3/rev )
  • Operation pressure: 205 bar ( 2,973 psi )with maximum back pressure on return line of 5 bar
  • Max-Min pump flow: 45 - 15 l/min ( 11.9 - 4.0 g/min )
  • Gear ratio: 1-stage planetary 5.8:1
  • Brake: Multi-Disc Brake (MDB) patented and counter-balance valve together
  • Winch construction: steel housings with steel drum
  • Winch Rotation: counter clockwise rotation of the drum
  • Drum size (dxDxL):
    210 x 344 x 191 mm (8.3” x 13.5” x 7.5”)
  • Recommended wire rope:
    10 mm x 57m with 1,960 N/mm2 grade with minimum breaking strength of 69.8 kN for EN 14492-2 rating
    3/8” x 187 ft with EIPS grade with minimum breaking strength of 15,663 lbf for ASME 30.7 rating
  • Mounting bolts pattern:
    290 x 196 mm ( 11.4” x 7.7”)
  • Winch weight:
    81 kg / 178.6 lb 

Performance Data: 

Line Lift and Rope Capacity
Layer of Wire Rope
Lift by layer, kg / lb
Total Rope on the Drum, m / ft
Line Speed
mpm / fpm
1st
2,036 / 4,489
12.5 / 41
33.8 / 111
2nd
1,866 / 4,414
26.2 / 86
36.8 / 121
3rd
1,723 / 3,796
41 / 134
40 / 131
4th
1,600 / 3,527
57 / 187
43 / 141

*  The total rope on the drum may vary from figures stated elsewhere

Warning
* The winch is not intended to be used in any manner for the movement or lifting of personnel.
* The rated line pull shown is based on the first layer of rope on the drum.
* The rope winding on the drum shall remain 5 wraps from the drum.

Warranty
Each new winch is guaranteed against defects in workmanship and material defects for a period of twelve months from date of purchase.
 
Load Rated:
   Load and speed vary according to how much wire rope is on the drum. The first layer of rope on the drum delivers the slowest speed The total rope on the drum may vary from figures stated elsewhere and the maximum load. A full drum delivers the maximum speed and the minimum load. For this reason, all hydraulic hoisting winches are rated at their top layer of wire rope on the drum
  Leave a minimum of two (2) free layers below the top of the drum flanges to meet European lifting rules
  Leave a minimum of ½ inch ( 13 mm ) below the tope of the drum flange to meet ASME 30.7
Dimension, mm/in:

CE requirement as options:

  • Drum guard
  • Emergency stop device
  • Overload device
  • Up and Down limit protection device