Comeup Hydraulic Hoisting Winch APE 12

1,200 kg Hydraulic Hoisting Winch

  • Internally lubricated for reliable power and an exceptionally long service life.
  • Compact, hardened and high efficiency gear trains reduce power loss and placed inside the drum.
  • Multi-Disc Brake (MDB) patented and two ways counter-balance valve together for holding full load.
  • The normal lifting capacity is rated at the top layer of wire rope. It always lifts its rated load no matter what layer of wire rope it is.
  • The drum is dimensioned to obtain a minimum D/d ratio of 18:1 with a 5:1 minimum safety factor at the rated load.
  • “The winch meets the requirement of FEM9.511 covering rating and classification and FEM 1001 standard for the calculation of lifting equipment.
  • Compliance with international standards such as ASME B30.7 and, CE Machinery Directive 2006/42/EC
 
Specification/Part Numbers
  • Part number: PN 681910
  • Rated line lift: 1,200 kg ( 2,640 lb ) single line at the top layer of rope
  • Line speed: 35.5 mpm / 116 fpm single line at the top layer of rope
  • Motor: 194.6 cm3/rev ( 11.9 in3/rev )
  • Operation pressure: 150 bar ( 2,176 psi )with maximum back pressure on return line of 5 bar
  • Max-Min pump flow: 40 - 20 l/min ( 10.6 - 5.3 g/min )
  • Gear ratio: 1-stage planetary 5:1
  • Brake: Multi-Disc Brake (MDB) patented and counter-balance valve together
  • Winch construction: steel housings with steel drum
  • Winch Rotation: counter clockwise rotation of the drum
  • Drum size (dxDxL):
    205 x 305 x 191 mm (8.1” x 12.0” x 7.5”)
  • Recommended wire rope:
    10 mm x 55 m with 1,960 N/mm2 grade with minimum breaking strength of 69.8 kN for EN 14492-2 rating
    3/8” x 180 ft with EIPS grade with minimum breaking strength of 15,663 lbf for ASME 30.7 rating
  • Mounting bolts pattern:
    200 x 170 mm ( 7.9” x 6.7”)
  • Winch weight:
    63.5 kg / 140 lb 

Performance Data: 

Line Lift and Rope Capacity
Layer of Wire Rope
Lift by layer, kg / lb
Total Rope on the Drum,
m / ft

Line Speed, 
mpm / fpm

1st
1,535 / 3,384
12.2 / 40
27.8 / 91
2nd
1,404 / 3,094
25.6 / 84
30.4 / 100
3rd
1,294 / 2,853
40 / 131
33 / 108
4th
1,200 / 2,645
55 / 180
35.5 / 116

*  The total rope on the drum may vary from figures stated elsewhere

Warning
* The winch is not intended to be used in any manner for the movement or lifting of personnel.
* The rated line pull shown is based on the first layer of rope on the drum.
* The rope winding on the drum shall remain 5 wraps from the drum.

Warranty
Each new winch is guaranteed against defects in workmanship and material defects for a period of twelve months from date of purchase.
 
Load Rated:
   Load and speed vary according to how much wire rope is on the drum. The first layer of rope on the drum delivers the slowest speed The total rope on the drum may vary from figures stated elsewhere and the maximum load. A full drum delivers the maximum speed and the minimum load. For this reason, all hydraulic hoisting winches are rated at their top layer of wire rope on the drum
  Leave two free layers below the top of the drum flanges to meet European lifting rules
  Leave a minimum of ½ inch ( 13 mm ) below the tope of the drum flange to meet ASME 30.7
Dimension, mm/in:

CE requirement as options:

  • Drum guard
  • Emergency stop device
  • Overload device
  • Up and Down limit protection device